Speed Queen Wash Spin and Lid Lock Flashing 3 Times (13 Fixes Added!)

Hi dear friends welcome to our blog. If your Speed Queen Wash Spin and Lid Lock Flashing 3 Times.

So Don’t worry this is a common issue.

In this guide, we explain 15 common reasons for this problem with unique solutions. So let’s start now.

Speed Queen Wash Spin and Lid Lock Flashing 3 Times

1. Faulty Lid Lock

Cause

The flashing of the wash, spin, and lid lock lights three times typically indicates a malfunction in the lid lock mechanism of your Speed Queen washing machine.

This is often due to a faulty switch or sensor within the lock system that fails to recognize the lid’s closed position.

Solution

The solution to a faulty lid lock is often a replacement of the lock assembly.

You can refer to your Speed Queen washing machine’s manual for specific instructions on how to do this.

However, due to the complexity of the process, it is generally recommended to hire a certified appliance repair technician to ensure the job is performed correctly and safely.

2. Damaged Lid Switch

Cause

The lid switch is a safety mechanism used in washing machines to ensure that the lid is properly closed during operation.

If your Speed Queen washer’s spin and lid lock is flashing 3 times, it may indicate a damaged or faulty lid switch.

This could be due to normal wear and tear, a power surge, or even a result of overly heavy loads that might have knocked the switch out of position.

Solution

To address this issue, first, inspect the lid switch for any visible signs of damage.

If damaged, the most straightforward solution is to replace the lid switch. You can do this yourself if you’re handy with home appliances, or consider hiring a professional to ensure the replacement is done correctly.

3. Inoperative Water Valve

Cause

The inoperative water valve in a Speed Queen Wash machine is typically caused by a malfunction in the solenoid valve, which controls the flow of water into the machine.

This could be due to an electrical connection issue, a blockage in the water line, or simply wear and tear over time.

Solution

The solution to an inoperative water valve starts with troubleshooting the issue.

Begin by checking the electrical connections to ensure they are secure and free from any damage.

If the connections are in order but the issue persists, the water line might need to be inspected for blockages.

If neither of these solutions rectifies the problem, it may be necessary to replace the solenoid valve.

4. Incorrect Water Level

Cause

The “Incorrect Water Level” warning often indicates that the washing machine’s water sensor is not operating correctly.

This can result from an accumulation of hard water deposits, improper connections, or even a faulty sensor.

Solution

To resolve this issue, start by checking the machine’s water hose fittings for any signs of clogs or blockages.

If the problem persists, you may need to clean the sensor to remove any debris or hard water deposits.

5. Obstructed Drain Pump

Cause

An obstructed drain pump in your Speed Queen Washing Machine could be causing the wash, spin, and lid lock to flash three times.

This typically happens when foreign objects like coins, buttons, or excess lint get trapped in the pump, impeding its function.

This issue can prevent water from being adequately pumped out during the spin cycle, which triggers the flashing signal as an alert.

Solution

To rectify this issue, the drain pump needs to be cleaned. Ensure the washing machine is unplugged before you start.

Access the drain pump (usually located at the bottom of the machine), remove the obstruction carefully, and clean the pump.

It’s advisable to check and clean your drain pump regularly to prevent future obstructions.

6. Defective Timer

Cause

The Speed Queen washing machine flashing 3 times could indicate a defective timer.

The timer is the control device that regulates the various functions of the machine such as washing, rinsing, and spinning.

If it’s faulty, it could disrupt these cycles, leading to the flashing light signal.

Solution

In case of a defective timer, the most viable solution is to replace it with a new one.

It’s recommended to hire a professional technician for the replacement to ensure that the new timer is installed correctly.

Remember, mishandling of such components could lead to further damage or void your machine’s warranty.

7. Motor Overheating

Cause

Motor overheating commonly happens when the washing machine is used excessively or is overloaded with clothes.

This strain increases the motor’s workload, leading to an escalation in heat production.

Over time, without necessary breaks or proper maintenance, the motor can reach temperatures that are beyond its capacity to handle.

Solution

To prevent the motor from overheating, ensure that the washing machine is not being overused or overloaded.

Allow the machine to rest between heavy loads and adhere to the manufacturer’s guidelines on load size.

Regular servicing of the machine can also aid in identifying potential issues early on, keeping the motor in good condition and reducing the likelihood of overheating.

8. Unbalanced Load

Cause

An unbalanced load in your Speed Queen washing machine can occur when the laundry inside the drum is not evenly distributed.

This imbalance can cause the machine to shake or move during the spin cycle, potentially damaging the appliance over time.

It can also lead to the wash, spin, and lid lock flashing three times, indicating an error related to the load balance.

Solution

To solve this issue, pause the washing machine and manually rearrange the items inside the drum to better distribute the weight.

Make sure to mix large and small items in each load to help maintain balance.

If the issue persists, reduce the size of your laundry load or try to wash items of similar weight together.

9. Broken Drive Belt

Cause

A broken drive belt can often be the cause of your Speed Queen washing machine’s wash, spin, and lid lock lights flashing three times.

The drive belt is responsible for turning the drum. When it breaks, the drum can’t spin, and the washing machine senses this, causing it to flash the lights as an error signal.

Solution

The solution to a broken drive belt is replacing it. First, you’ll need to purchase a new belt designed for your specific model of Speed Queen washing machine.

Then, you could either replace it yourself, if you feel comfortable doing so, or hire a professional appliance repair service.

10. Faulty Main Control Board

Cause

The main control board governs the majority of the washing machine’s functions.

If your Speed Queen washer’s spin and lid lock is flashing three times, it can indicate a fault with the main control board.

This could be due to an electrical failure or a software glitch, disrupting the normal operations of the machine.

Solution

The most direct solution to a faulty main control board is to replace it.

However, it’s recommended to first try resetting the machine by disconnecting it from the power source for a few minutes.

This may allow the control board to reset and function correctly. If the issue persists, it’s best to consult a professional or contact Speed Queen’s customer service for further assistance.

11. Worn Out Snubber Ring

Cause

The snubber ring is a critical component of your Speed Queen washing machine that aids in preventing vigorous shaking during the spin cycle.

When it becomes worn out, it can no longer perform its function efficiently, which can lead to flashing lights on the machine.

The wear and tear of the snubber ring is caused by extensive use over time.

Solution

The worn-out snubber ring should be replaced to restore the smooth operation of your Speed Queen washing machine.

This task requires some technical expertise, so it’s recommended to hire a professional repair service.

12. Incorrect Load Size

Cause

Speed Queen washing machines are designed to handle specific load sizes for optimal washing performance.

If your washer’s Wash Spin and Lid Lock lights are flashing three times, it may be due to an incorrect load size.

This could mean the load is too large, too small, or unbalanced, which can disrupt the machine’s normal operation and trigger this error code.

Solution

To rectify the situation, first, remove the laundry from the washer and ensure you’ve selected the appropriate load size for the amount of clothing you’re washing.

If the issue persists, try redistributing the clothes evenly around the drum to create a balanced load.

13. Damaged Power Cord

Cause

The power cord of your Speed Queen washing machine is a crucial component that delivers electricity from your power outlet to the appliance.

If this cord is damaged, it might result in an inconsistent power supply, causing the wash, spin, and lid lock lights to flash three times.

The damage might be due to wear and tear over time, or it could be the result of a power surge.

Solution

If you find that the power cord is damaged, the most efficient solution is to replace it.

Before attempting to replace the cord, ensure that the washing machine is unplugged from the wall socket to avoid electrical accidents.

It’s always safer to call in a professional technician to replace the power cord, as this requires knowledge of the machine’s electrical system and might void your warranty if not done properly.

Conclusion

In conclusion, the Speed Queen Washer blinking or flashing lid lock light three times typically signifies a malfunction within the washer’s lid locking system.

This may be due to a variety of factors including a faulty lid lock assembly, a compromised wiring harness, or a malfunctioning control board.

It is recommended to diagnose and address these potential issues promptly to prevent further complications.

If you’re unsure or uncomfortable performing these checks and repairs yourself, consider seeking professional assistance to ensure the longevity and optimal performance of your washer.

FAQs

How do you reset the error on a Speed Queen washing machine?

To reset the error on a Speed Queen washing machine, unplug the machine, wait for about 1 minute, and then plug it back in. This simple process often clears most error codes.

Why is my washing machine’s wash light flashing?

The wash light on your Speed Queen washing machine could be flashing for several reasons.

A common cause is an imbalance or overload in the machine. If the load is too heavy or unbalanced, the machine may not be able to spin properly, causing the wash light to flash. Lid Lock Flashing

What is the error code FL on Speed Queen?

The error code ‘FL’ on a Speed Queen washing machine indicates a ‘Failed to Lock’ error.

This means that the machine’s lid is unable to lock, which is a safety feature designed to prevent the machine from spinning if the lid is not securely closed.