Samsung Washing Machine No Power No Lights (15 Fixes Added!)

Hello dear visitors welcome to our blog.

Suppose your Samsung Washing Machine has No Power and No Lights. So Don’t worry this is a common fault.

In this guide, we explain some common reasons for this problem with unique solutions.

Table of Contents

Samsung Washing Machine No Power No Lights

1. Power Cord is Damaged or Unplugged

Cause

The most common reason for your Samsung washing machine showing no power or lights is a damaged or unplugged power cord.

This could be due to wear and tear over time, accidental damage, or it might have been unplugged unintentionally during cleaning or moving.

Solution

Check the power cord visually for any signs of damage like cuts, kinks, or burns.

If you find any, you may need to replace the power cord or have a professional repair it.

If the cord appears to be in good condition, ensure that it is securely plugged into a working power outlet.

It’s also wise to plug another device into the same outlet to confirm it’s functioning correctly. If the outlet is not working, you may need to reset the circuit breaker or replace the outlet.

2. Circuit Breaker Has Tripped

Cause

The circuit breaker is a crucial safety component that prevents electrical overload.

If your Samsung washing machine has no power and no lights, it’s possible the circuit breaker has tripped.

This could occur due to an abrupt power surge or if there’s a short circuit in the washing machine’s electrical system.

Solution

To resolve the issue, first locate the circuit breaker box, typically found in a utility room or basement.

Find the switch that corresponds to the washing machine. If it’s flipped to the ‘off’ position or is in the middle, it has been tripped.

Reset it by moving it to the ‘off’ position, then back to ‘on’. If the washing machine still doesn’t power up, it suggests the issue might be more complex, warranting professional assistance.

3. Faulty Power Outlet

Cause

A faulty power outlet can be a common cause for your Samsung washing machine showing no power or lights.

This could be due to various reasons such as a tripped circuit breaker, burnt fuse, or loose wiring.

It’s imperative to remember that these issues could be a potential fire hazard.

Solution

To rectify a faulty power outlet, first, check if the circuit breaker has tripped or if the fuse is burnt and replace if necessary.

If the problem persists, it could be due to loose wiring or a defective outlet. In this case, it is highly recommended to call a professional electrician.

It is not advisable to attempt fixing yourself due to the high-risk nature of electrical work.

4. Defective On/Off Switch

Cause

A defective on/off switch can often be the culprit behind your Samsung washing machine not powering up.

This failure could be due to numerous reasons, such as a blown fuse, a tripped breaker, or simply wear and tear of the switch over time.

This issue effectively halts the flow of power to the appliance, making it non-responsive.

Solution

The recommended solution for a faulty on/off switch is usually its replacement.

Before proceeding, ensure to disconnect the washing machine from the power source to avoid any potential electrical hazards.

Once disconnected, the switch can be accessed by removing the control panel. If you’re comfortable with DIY procedures, you could replace the switch yourself.

However, if you’re unsure, it’s advisable to seek professional help to prevent any further damage.

5. Control Board is Malfunctioning

Cause

The control board of a Samsung washing machine is essentially the brain of the appliance.

It regulates all the functions, from water intake and temperature control to spin and rinse cycles.

If your washer has no power and no lights, a possible cause could be a malfunctioning control board.

Power surges, frequent use, or simply the passage of time could lead to wear and tear on this component, causing it to malfunction.

Solution

If the control board is the cause of the issue, it’s recommended to seek professional help due to the complexity of this component.

A certified technician can properly diagnose the problem and determine whether the control board needs to be repaired or completely replaced.

If the board is beyond repair, a new one should be installed. It’s important to remember not to attempt to fix this on your own as improper handling could lead to further damage.

6. Lid Switch is Broken

Cause

The lid switch is a safety feature found in top-load washing machines, designed to prevent the washer from operating while the lid is open.

If your Samsung washing machine is not turning on and there are no lights, a broken lid switch could be the culprit.

The switch could have been damaged due to regular wear and tear or forced lid closure.

Solution

The solution to a broken lid switch lies in its replacement.

To handle this, it is recommended to enlist the help of a professional technician due to the complexity of the task.

A professional can ensure the appropriate lid switch part is ordered and installed correctly, restoring your washing machine to its optimal functioning state.

7. The start Switch is Defective

Cause

If your Samsung washing machine has no power and no lights, a defective start switch could be the culprit. This switch is responsible for the initial power-up of the machine.

When it malfunctions, the flow of electricity to the machine is disrupted, preventing it from powering up.

Solution

To resolve this issue, you’ll need to replace the defective start switch. Unplug the machine, open the control panel, and locate the switch.

If you’re not comfortable working with electrical appliances or the problem persists, seek professional assistance. Always prioritize safety when dealing with electrical faults.

8. Timer Knob is Not Correctly Set

Cause

Another reason for a Samsung washing machine having no power and no lights is the incorrect setting of the timer knob.

The timer knob is a critical component that controls the duration and sequencing of washing cycles.

If it’s not set properly, the machine may fail to turn on or initiate any washing cycles.

Solution

The solution to this issue is straightforward – ensure that the timer knob is correctly set.

Turn it gently until it clicks into the desired setting. If the knob is damaged or not functioning as it should, consider replacing it.

If you are unsure of the process, consult the user manual or contact a professional for assistance.

9. Motor is Overheated

Cause

The motor overheating in your Samsung washing machine could be a result of excessive use, a clogged vent, or a malfunctioning component.

Prolonged usage of the machine without allowing it to rest can cause it to heat up significantly.

Similarly, a blocked vent can hinder the flow of air, leading to an increase in temperature.

Alternatively, a faulty component like a drive belt or motor capacitor might be the culprit, causing the motor to work harder than it should and thus overheat.

Solution

To resolve the issue of an overheated motor, start by giving your washing machine a break.

Allow it to cool down before attempting to use it again. Next, inspect the vent for any blockages and clear them if necessary. If the problem persists, it could be due to a faulty component.

In this case, it is advised to contact a professional technician or Samsung’s customer service to diagnose and repair the faulty component.

10. Door Lock is Damaged

Cause

The door lock, also known as the door interlock, is a safety feature that prevents the door from being opened while the machine is in operation.

If this component is damaged, the machine might interpret it as an open door, thus failing to power up or illuminate the control panel lights.

Solution

To resolve this issue, you will need to replace the damaged door lock. Start by disconnecting the washing machine from the power source.

Then open the door and remove the screws holding the door lock in place. Replace it with a new one, ensuring it fits securely.

Lastly, reconnect the power and test whether the machine is now able to power up and illuminate the control panel lights.

Always ensure safety precautions are taken while performing these steps, or consider hiring a professional if in doubt.

11. Internal Fuse is Blown

Cause

The internal fuse of a Samsung washing machine can blow due to various reasons including power surges, faulty wiring, or worn-out components.

This will disable the power and lights of your machine, rendering it inoperable.

Solution

To resolve the issue of a blown internal fuse, you will need to replace it. Firstly, ensure the machine is unplugged from the power source to avoid any electrical hazards.

Locate the fuse box usually found at the back of the machine, carefully remove the blown fuse, and replace it with a new one of the same type and rating.

If you’re not comfortable handling electrical components, it is advisable to call a professional repair service.

12. Wiring Issues Inside the Machine

Cause

Occasionally, your Samsung washing machine may experience power issues due to faulty or loose wiring inside the machine.

Over time, wires can become disconnected or damaged due to vibrations, wear and tear, or poor manufacturing.

This can result in the machine not receiving the necessary electrical supply, leading to no power and no lights on your washing machine.

Solution

If you suspect wiring issues, the first step is to disconnect the washing machine from the mains and then carefully inspect the internal wiring.

Look for any signs of disconnected, frayed, or burnt wires. If detected, it’s advisable not to attempt repairs yourself due to the high risks associated with electrical circuits.

Instead, reach out to a professional appliance repair service or contact Samsung’s customer service for assistance. Remember, safety should always be your top priority.

13. Water Level Control Switch is Defective

Cause

The Water Level Control Switch, also known as the pressure switch, is a crucial component that regulates the amount of water in your Samsung washing machine.

It’s designed to switch off the fill valve when the desired water level is reached. If it’s defective, the machine may not turn on, and no lights will be displayed.

Solution

To address a defective Water Level Control Switch, first, try to reset the machine by unplugging it for about 5 minutes and then plugging it back in.

If the problem persists, it’s advisable to call a professional repair service. They can conduct a detailed diagnosis and, if necessary, replace the defective switch with a new one.

Remember, any attempts to fix electrical components on your own can be dangerous if you’re not experienced.

14. Inoperative Drive Motor

Cause

The drive motor of a Samsung washing machine is the primary component that spins the inner tub.

If the washing machine is not spinning or agitating, it’s possible that the drive motor may be faulty.

This could be due to a variety of issues, such as a worn-out motor, a broken motor coupling, or electrical problems that prevent power from reaching the motor.

Solution

Resolving the issue of an inoperative drive motor largely depends on the underlying cause.

If the motor is worn out, it may need to be replaced, which should be done by a professional to ensure proper installation and safety.

If the issue is a broken motor coupling, this can usually be replaced more easily. Electrical problems may require a professional technician to diagnose and repair the problem.

15. Defective Transformer

Cause

A defective transformer in your Samsung washing machine could be the reason why there’s no power or lights.

The transformer is responsible for converting the high-voltage power from your home into the lower voltage that the washing machine uses.

If it’s faulty, it won’t provide the necessary electricity, leading to no power or lights.

Solution

The solution to a defective transformer is typically replacing it. It’s advisable to hire a professional technician for this task.

Working with electrical components can be dangerous if not done correctly.

Moreover, the technician can ensure that the new transformer is compatible with your specific Samsung washing machine model.

Conclusion

A Samsung washing machine with no power and no lights can be a cause for concern, but it doesn’t necessarily signal a major issue.

The problem could stem from a simple power outage, a tripped circuit breaker, or a loose plug. However, if these common issues are ruled out, it might indicate a need for professional repair or replacement of internal parts like the power cord, control board, or door switch.

Remember, safety should be your first concern when dealing with electrical appliances; always consider consulting a professional if you’re unsure or uncomfortable with any steps in the troubleshooting process.

It’s essential to maintain your machine properly and regularly for it to serve you effectively for a long time.

FAQs

Why is my Samsung washing machine not powering on?

Your Samsung washing machine may not be powering on due to issues with the power supply, a blown fuse, or problems with the machine’s control board.

It’s recommended to check these areas or have a professional examine the machine.

Why is there no power light on my washing machine?

The absence of a power light on your washing machine could be due to a faulty indicator light, an issue with the machine’s wiring, or a malfunction in the control board.

It’s advisable to consult a technician for a thorough diagnosis.