10 Common Reasons Kenmore Washing Machine Leaking Water

Hello dear guest welcome to our blog. If your Kenmore Washing Machine leaks water. 

So Don’t worry about this expected problem. 

In this guide, we explain 10 common reasons for these problems with amazing fixes.

Kenmore Washing Machine Leaking Water

1. Faulty Water Inlet Valve

Cause

Whoa there, did you know a faulty water inlet valve could cause your Kenmore washing machine to leak water? 

When the water inlet valve isn’t sealing properly or has been damaged, water trickles down even when the machine isn’t running. 

The valve, a gatekeeper of water flow, may fail due to normal wear and tear or sediment build-up.

Solution

But hey, no worries! It’s not a game over! You can test the valve’s continuity with a multimeter and if it’s faulty, just replace it. 

Ensure to disconnect the washing machine from the power source before starting. If you’re not comfortable doing this yourself, it’s alright to call in a professional. 

After all, we want your machine to wash clothes, not the floor!

2. Damaged Door Seal

Cause

The door seal, or gasket, is the rubbery strip that forms a water-tight barrier between your washing machine’s door and drum. 

If it’s damaged, you may notice your machine behaving like a rebellious teen, leaking water all over the place and driving you nuts! 

Damage can occur from regular wear and tear or sharp items like zippers and hooks.

Solution

Don’t stress, we’ve got a solution for you! The first step is to examine the seal carefully for signs of damage. If you spot any, it’s time to replace it. 

You can order a new seal from Kenmore or a third-party seller. Once you’ve got it, either replace it yourself if you’re feeling handy or call in a professional to do the job. 

With a new seal in place, your washing machine will stop its waterworks and get back to doing what it does best – cleaning clothes!

3. Loose Drain Hose

Cause

“A loose drain hose could be the cheeky culprit causing your Kenmore washing machine to leak water. 

This usually happens when the hose isn’t tightly secured to the washer or the standpipe. 

When it wiggles loose, that’s when you see a puddle forming around your machine.“

Solution

“Fixing this issue is a cinch! First, you’ve gotta check if the hose is indeed loose. If it is, just push it back onto the washer or standpipe and secure it with a clamp. 

Remember, the tighter the connection, the less the chance of a surprise water show. If the hose is damaged, you might have to replace it. 

But hey, that’s a small price to pay to keep your laundry room from turning into a splash zone.”

4. Cracked Tub

Cause

Dude, do you know how your favorite pair of jeans can wear out over time? Well, your washing machine tub can have that same problem. 

Constant use and heavy loads can lead to small cracks, which might be the reason your machine is leaking. Tiny cracks can turn into big problems.

Solution

So what to do when life gives you a cracked tub? Don’t freak out! It’s time to bring in the pros. Hire a service technician and replace the tub. 

It’s not a DIY job – it’s complicated and you don’t want to risk breaking other parts of your machine. Remember, taking care of your tub means taking care of your clothes too!

5. Defective Pump

Cause

When a pump becomes defective, it might be due to the age of your washing machine, or it could result from an unfortunate laundry mishap. 

For instance, a random coin or paperclip could have found its way into the pump, causing it to malfunction. Remember, always empty your pockets before doing laundry!

Solution

Alright, no worries! Most of the time, a leaking washing machine is a simple fix. If a foreign object is causing the pump to leak, you can usually remove it yourself with a pair of pliers. 

But if the pump itself is damaged, you may need to replace it. 

Don’t be afraid to call in a professional if you’re not comfortable handling it yourself – your safety is super important! And hey, next time, you’ll know to check your pockets first!

6. Overfilled Washer

Cause

Woah! So you’ve got a washer that thinks it’s a pool party and likes to overflow? 

That’s not cool! The main reason could be a faulty water level switch. It’s a pressure-activated switch that controls the water levels inside your tub. 

If this little gadget is on the fritz, it could be sending incorrect signals to the water valve or control board causing an overfill situation.

Remember, it’s the water level switch that’s your washer’s lifeline for controlling water intake. It’s like the boss of water control!

Solution

To the rescue! First off, don’t panic. Simply shut off the water supply to stop the filling. 

To fix this, the water level switch may need to be replaced, which is pretty simple to do. 

You can find a new switch online or at a local appliance parts store. Be sure to unplug your washer before starting any repairs, safety comes first!

Remember to turn off the water and power supply before starting any fixes. You got this, be the hero of your laundry day!

7. Detergent Overuse

Cause

Excess love for bubbles might make your washing machine cry, literally! Overusing detergent can cause an overflow of suds, which can subsequently leak from your washing machine. 

This is especially the case with high-efficiency washers that require less detergent. Remember, your washer isn’t a bubble party!

“Less is more when it comes to detergent usage. Too many suds can cause your machine to overflow.”

Solution

The remedy is super simple – use less detergent! Refer to your washing machine’s instruction manual to see how much detergent it recommends. 

If you can’t find the manual, a general rule of thumb is to only fill the detergent drawer to the MAX line or even less if you’re washing a smaller load. 

Experimenting with detergent amounts may be necessary to find the sweet spot.

“Check your washing machine’s manual for detergent recommendations. Don’t go beyond the MAX line!”

8. Poorly Installed Machine

Cause

When your washing machine is not installed properly, you may encounter water leakage issues. 

Like that annoying friend who overstays their welcome, water can trickle out of your washer if it’s not leveled correctly or if the hoses are installed incorrectly. 

Leveling your machine improperly or installing the hoses incorrectly can really start a water party in your laundry room that nobody wants to attend!

Solution

Don’t fret – there’s definitely a solution here! Start by checking if your machine is on a flat, level surface. If it’s not, adjust the feet of the machine until it stands straight. 

Like adjusting the legs of a wobbly table, it’s that simple! Next, inspect the hoses. If they’re loose, tighten them up. If they’re worn out, it’s time for a replacement. 

Remember, proper leveling and correct hose installation are key to keeping your laundry room dry and your machine singing a happy tune!

9. Worn Out Tub Seal

Cause

If you’ve been noticing a pool of water around your Kenmore washing machine and you’re wondering what’s up, one potential culprit could be a worn-out tub seal. 

This seal, a little like a superhero shield, keeps the water contained within the tub during the wash cycle. 

But even superheroes age, and over time, wear and tear can cause the seal to break down and let some of that water escape.

Solution

Not to worry though, we’ve got your back. Replacing the tub seal isn’t as daunting as it might sound. All you need is a new seal from your Kenmore supplier, and a bit of DIY spirit. 

Once you’ve got your hands on the new seal, you can easily swap the faulty one out. Remember to put every screw and bolt back where it belongs, and voila! 

Your washing machine should be back in action, with no more unsightly puddles on your laundry room floor. 

Remember, if this task seems too big, don’t hesitate to call in a professional – better safe than sorry!

10. Broken Pipe Connection

Cause

Yo! So, you’re facing trouble with your washing machine leaking and it’s getting all messy, right? Well, a common cause could be a broken pipe connection. 

Don’t freak out, it sounds more intimidating than it really is. 

It usually happens when your machine gets a little too excited and shakes during the spin cycle, causing the pipes to wiggle out of place or even break. 

These pipes are your washing machine’s lifeline – carrying water into and out of the machine.

Solution

Alright, now that we know the issue, let’s get it fixed! Before we get our hands dirty, remember, always unplug your washing machine before attempting any repairs, we don’t want any surprises! 

Next, you need to carefully inspect those pipes – look for any cracks, damage, or loose connections. If the pipe is simply loose, you can simply tighten it back into place. 

However, if the pipe is cracked or damaged, you might need to replace it. 

No worries though, replacement pipes are generally inexpensive and can be found easily online or at your local hardware store. 

Plus, there are plenty of DIY videos to guide you through the process. So, let’s roll up those sleeves and bring back the smooth operation of your washing machine!

Conclusion

So, here’s the deal. We’ve gone over the reasons why your Kenmore washing machine might be leaking water, what to look for, and how to tackle the problem. 

Remember folks, this isn’t rocket science! Yes, it might be a tad bit annoying to deal with, but with this guide in your toolbox, you’re well on your way to becoming the DIY-er of the year! 

Just keep calm, carry a wrench, and let’s stop that leak. If the problem persists, don’t hesitate to call for professional help. After all, we’re here for a leak-free, hassle-free laundry day!

FAQs

Why is my washing machine leaking water from underneath?

There could be a few wild party-crashing dudes causing this! It could be an overly enthusiastic drain pipe that’s not draining properly or a faulty water pump. 

Sometimes, it’s a rebellious door seal that has decided to spring a leak.

What are common reasons for washing machines to leak?

Usually, there are a couple of usual suspects when your washing machine starts to leak. 

These can include worn-out tub fittings, a leaky fill hose, or a mischievous door seal. Oh, and let’s not forget the water pump, it can be a culprit too!

How do you dry a leaking washing machine?

First off, turn off and unplug that naughty machine! Use towels to mop up that pool party gone wrong. Then, open up the doors and let the air have a go at it. 

If you have a fan or a heater, point it at the machine. Just be sure not to plug anything in until it’s totally dry!

Will a washer leak if not level?

Yes, dude, it absolutely can! If your washer is not level, it can cause some serious waterworks. The water can overflow from the washtub during the spin cycle. 

So, better to balance your washer correctly to avoid these messy situations!

Kenmore Washing Machine Not Draining

Kenmore Washer Sensing Light Flashing

Kenmore Washing Machine Door Lock

Kenmore Washing Machine Leaking From the Bottom

Kenmore Dryer Keeps Shutting Off

Kenmore Washing Machine Not Locking

Kenmore Washer Lid Lock Flashing

Kenmore Washing Machine Not Agitating

Washing Machine Making Buzzing Noise When Spinning

Indesit Washing Machine All Lights Flashing and Not Draining

Why Is My Washing Machine Smoking and Smells of Burning