8 Common Reasons Indesit Washing Machine All Lights Flashing and Not Draining

Encountering an issue with your Indesit Washing Machine can be frustrating, especially when the all lights are flashing and it refuses to drain. 

This common malfunction can disrupt your daily routine and leave you with a pile of unwashed laundry. 

In this guide, we’ll explore eight potential causes behind this issue and provide you with actionable solutions to get your washing machine back up and running efficiently.

Indesit Washing Machine All Lights Flashing and Not Draining (Let’s Know Reasons!)

8 Common Reasons Indesit Washing Machine All Lights Flashing and Not Draining

Faulty drain pump

One common cause of an Indesit washing machine flashing all lights and refusing to drain water is a faulty drain pump

The drain pump is responsible for expelling used water from the machine. Over time or due to constant use, the pump may become damaged or blocked with debris, preventing it from functioning properly. 

This causes the machine to be unable to drain the water, and as a result, it flashes all lights as an error signal.

Fix

To mitigate this issue, it is recommended to inspect the drain pump for any visible damage or blockages. 

If the pump is indeed faulty, a replacement should be considered. It is often cost-effective and more efficient to replace the pump rather than attempting to repair it.

Blocked filter

A blocked filter in your Indesit washing machine can prevent the appliance from draining properly, causing all lights to flash as an indicator of the issue. 

This is a common problem and it often stems from the accumulation of small items or debris such as coins, hair, or lint in the drain filter. 

This can obstruct the free flow of water, leading to poor drainage or no drainage at all. It is critical to check and clean your washing machine’s filter regularly to ensure efficient operation.

Fix

To fix a blocked filter, you should first disconnect the washing machine from the power supply. Then, locate the filter, usually found at the front bottom of the machine. 

Remove the filter cover, take out the filter, and clean it thoroughly under running water. 

After you’ve removed all debris, reinsert the filter, replace the cover, and reconnect the power. Your machine should now operate and drain correctly.

Incorrect washing machine load

An Incorrect washing machine load can cause a range of issues, including all lights flashing and the machine not draining properly. 

Overloading the washing machine impedes the circulation of water and detergent, preventing laundry from being thoroughly cleaned. 

It also puts additional strain on the machine’s motor, which can lead to premature wear and tear.

Fix:

To rectify this issue, remove some items from the washing machine, redistribute the remaining ones evenly around the drum. 

Restart the machine to see if the problem has been resolved. If the issue persists, refer to the user manual or contact a professional for further assistance.

Broken door interlock

The broken door interlock is a common issue that can cause an Indesit washing machine to display all lights flashing and not drain properly. 

The door interlock is a safety feature that ensures that the door is securely locked when the machine is in operation. 

A malfunctioning door interlock can disrupt the machine’s ability to drain as it fails to send the necessary signals to the machine’s control system.

Fix

To resolve this issue, you may need to replace the faulty door interlock with a new one. 

Before attempting any repair, always ensure that the washing machine is unplugged from the power source to avoid any potential safety hazards.

Compromised electrical connections

When dealing with an Indesit washing machine where all lights are flashing and it’s not draining, compromised electrical connections could be the culprit. 

Faulty wiring or loose connections can interfere with the machine’s operations and cause such symptoms. 

Age, wear and tear or even rodents can compromise these electrical connections. It’s essential to handle these issues with utmost care due to the inherent risks associated with electricity.

Fix

Turn off and unplug the machine before inspecting any electrical connections. 

If you’re not comfortable handling electrical components or if the issue persists, it’s highly recommended to seek professional help

A qualified technician will have the necessary expertise to safely identify and rectify the problem.

Damaged pressure switch

A Damaged pressure switch in your Indesit washing machine can lead to all lights flashing and the machine not draining properly. 

The pressure switch is a key component that gauges the amount of water in the drum and regulates the drain and fill cycle. 

If it’s faulty or damaged, it may cause the machine to malfunction, leading to the aforementioned issues. 

This malfunction can often be diagnosed by a continuous water fill, irrespective of the machine’s status, or the inability to progress to the next cycle stage.

Fix

To resolve this, you may need to replace the pressure switch. 

It’s highly recommended to contact a professional appliance repair service to ensure correct diagnosis and safe replacement of the part.

Faulty motor triac

A Faulty motor triac is a common issue that can lead to your Indesit washing machine not draining properly and all lights flashing. 

The motor triac is a component that controls the motor speed, so when it’s faulty, the machine could either run excessively fast or not run at all. 

It’s like the machine’s ‘brain’ miscommunicating with its ‘legs’. This can lead to an inability to drain the water, causing all lights to flash as a distress signal.

Fix

To resolve this issue, you will need to replace the faulty motor triac. Remember to disconnect the washing machine from the mains before doing any repair work. 

It’s advisable to call a certified technician if you are not comfortable handling electrical components.

Software or programmer issues

Sometimes, the problem with your Indesit washing machine not draining could be due to software or programmer issues

Just like a computer, your washing machine uses a certain set of instructions to perform its job. If there’s a glitch in the software, it can interfere with the machine’s ability to drain water.

Fix:

If a software reset doesn’t work, you may need to call in a professional to diagnose and fix the issue, as it could be a deeper programming problem that requires specialist attention.

Malfunctioning timer

A malfunctioning timer in your Indesit washing machine can cause all lights to flash and prevent the machine from draining properly. 

This issue can occur when the timer, which controls the cycles and functions of your washing machine, fails to advance or gets stuck. 

If the timer isn’t signaling the drain cycle correctly, the machine may not be able to drain the water, leading to issues with operation.

Fix

To resolve this, you’ll need to inspect the timer for any signs of damage or wear.

 If evident, a professional repair or replacement will be required to restore your washing machine to proper functionality.

Defective water level sensor

A defective water level sensor could be another reason behind your Indesit washing machine flashing all lights and failing to drain. 

The water level sensor, also known as the pressure switch, monitors and controls the amount of water in the drum. 

If it’s defective or malfunctioning, it could send inaccurate signals to the machine’s control unit, causing it to overfill or not drain. This leads to issues with the overall operation of your washing machine.

Fix

For addressing this issue, you need to check the water level sensor. 

If it’s found to be faulty, you will need a replacement. 

Ensure this is done by a qualified professional to avoid further issues and to ensure the longevity and optimal operation of your washing machine.

Conclusion

All lights flashing and the machine not draining in your Indesit washing machine can be due to a malfunctioning timer or a defective water level sensor. 

Both issues interrupt the normal operation of the machine, preventing it from draining properly. 

Implementing the correct fixes, ideally by a professional, can restore your washing machine to its optimal functionality. 

Regular maintenance and timely repairs can help avoid such problems in the future, ensuring your washing machine serves you effectively for many years to come.

FAQs

Q: How do I reset my Indesit washing machine?

A: To reset your Indesit washing machine, unplug it from the power outlet, wait for about one minute, then plug it back in.

Q: Why is my washing machine flashing on wash?

A: Your washing machine may flash on ‘wash’ due to a technical glitch or if an issue arises during the wash cycle that needs your attention.

Q: Why is my washing machine lock flashing?

A: The lock flashing on your washing machine suggests that the door is not properly closed or locked, or the lock mechanism is malfunctioning.

Bosch Washing Machine Tap Symbol Flashing

Washing Machine Making Buzzing Noise When Spinning

Kenmore Washing Machine Leaking From the Bottom

Kenmore Washing Machine Leaking Water

Kenmore Washing Machine Door Lock

Kenmore Washing Machine Not Locking

Kenmore Washing Machine Not Agitating

Kenmore Washing Machine Not Filling With Water

Speed Queen Wash Spin and Lid Lock Flashing 3 Times

Why Is My Washing Machine Smoking and Smells of Burning

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top