Candy Dishwasher Flashing Lights (10 Common Reasons!)

Hi dear visitor welcome to our blog. If your Candy dishwasher flashing lights. 

So Don’t worry about it. this is a common thing. 

In this guide, we explain 10 common reasons of this problem with a unique solution

Candy Dishwasher Flashing Lights

1. Power Supply Interruption

Cause

Flashing lights on a Candy dishwasher often indicate a power supply interruption. 

This happens when the dishwasher experiences an unexpected power cut, voltage fluctuation, or a problem with the electrical wiring. 

This interruption breaks the dishwasher’s normal operating cycle, causing the lights to flash as a warning sign.

Remember, abrupt power losses or unstable electrical input can harm your dishwasher’s intricate electronic system.

Solution

To solve the power supply interruption problem, first, check your home’s electricity supply to ensure it’s steady and reliable. 

Next, inspect the dishwasher’s plug and cord for any damage or loose connections. 

If the issue persists, it may be due to faulty internal wiring or a damaged control board within the dishwasher.

In such cases, it’s best to call a professional technician to avoid any risks. Always ensure your appliances have a stable and safe power supply.

2. Overloading of Dishes

Cause

Overloading the dishwasher is a common cause of the flashing lights on your Candy Dishwasher. 

When there are too many dishes stacked haphazardly, it impedes the movement of the spray arms and limits the spray of water. 

Consequently, the washer cannot adequately clean the dishes, which may cause it to signal fault by flashing its lights. 

Remember, proper loading is crucial for efficient cleaning and optimal functioning of your dishwasher.

Solution

To rectify this, a simple yet effective solution is to unload the dishes and reload them properly. Make sure you arrange the dishes in a way that allows water and detergent to reach every dish. 

Larger items should be placed towards the back and sides while smaller items should fit comfortably in the top rack. 

Avoid stacking or nesting dishes and ensure the spray arms are not obstructed. Proper loading optimizes cleaning performance and helps avoid any further issues with flashing lights.

3. Inadequate Water Supply

Cause

The Candy dishwasher may flash lights as a warning when there’s an inadequate water supply. 

This is commonly due to the water supply valve being partially closed, a kink in the water intake hose, or a clogged filter. 

Check to ensure the water supply to your dishwasher is fully open, the intake hose is not kinked, and the filter is clean.

Solution

If you’ve confirmed these issues are not the cause, then the problem may be with the dishwasher itself. 

It may have a faulty water inlet valve or an issue with the float switch. Contact a professional technician if you suspect a mechanical issue. 

They can diagnose and fix the problem correctly to ensure your dishwasher runs smoothly.

4. Clogged Drain Hose

Cause

A clogged drain hose might be the reason your Candy dishwasher is flashing lights. 

Over time, food particles and grease can build up in the drain hose, causing a blockage and leading to poor drainage, which in turn causes your dishwasher to flashlights as a way of signaling the problem.

The most common indicators of a clogged drain hose include the dishwasher not draining, water backing up into the sink, and the occurrence of unusual sounds.

Solution

Addressing a clogged drain hose involves, first off, disconnecting the hose and using a straightened wire hanger to dislodge any blockages. 

If the clog persists, you might need to use a plumber’s snake or a similar tool. For stubborn clogs, the drain hose may need to be replaced.

Remember to disconnect the dishwasher from the power source before attempting any kind of maintenance. 

Safety should be your paramount concern when dealing with appliances.

5. Faulty Dishwasher Door

Cause

The Candy dishwasher flashing lights could indicate a faulty door. This usually happens when the door latch or door catch is damaged or misaligned, impeding the dishwasher from starting its cycle. 

The door might appear closed, but if the latch is not engaging properly, the dishwasher will interpret this as the door is open.

Note: It is crucial to inspect the door latch and door catch for any visible damage. Misalignment can prevent the dishwasher from initiating its cycle.

Solution

To address the faulty door issue, first, inspect the door latch or catch for any visible signs of damage. 

If damage is detected, consider ordering replacement parts and installing them or seek professional help if needed. 

If no visible damage is observed, try realigning the latch or catch. In case of persistent issues, get in touch with a professional appliance repair service.

Remember: If the problem continues after inspecting and realigning the door latch or catch, we recommend seeking professional help.

6. Malfunctioning Heating Element

Cause

The malfunctioning of the heating element in your Candy dishwasher is often due to wear and tear over time, or continuous exposure to water can lead to corrosion. 

An impaired heating element will not be able to warm up the water efficiently, leading to ineffective cleaning of dishes. 

It’s crucial to recognize the signs of a faulty heating element, including an unusual amount of water left on dishes after the washing cycle or the dishwasher not reaching the set temperature.

Solution

The most viable solution for a malfunctioning heating element is replacement. First, ensure you’ve unplugged the dishwasher to avoid electrical accidents. 

Then, using the dishwasher’s manual, locate and remove the element, and replace it with a new one. 

Make sure the new element is designed for your dishwasher model to ensure compatibility. 

Always exercise caution when dealing with electrical appliances. If you’re unsure, it’s recommended to enlist professional help to ensure safety and effectiveness.

7. Dishwasher Overheating

Cause

Overheating in a Candy Dishwasher is often caused by a malfunctioning thermostat. 

The thermostat controls the temperature within the machine, and if it’s faulty, it may cause the dishwasher to heat to extreme temperatures. 

A faulty heating element could also be the culprit. The heating element heats the water and if it’s defective, it may not shut off, causing the dishwasher to overheat.

Solution

To solve the overheating problem, start by checking the thermostat for any signs of damage or malfunction. Replacing a faulty thermostat can often solve the issue. 

If the thermostat is functioning correctly, the problem could be the heating element. The heating element can be tested for continuity, and if it’s defective, it should be replaced. 

Always remember to disconnect the dishwasher from the power source before attempting any repairs.

8. Damaged Float Switch

Cause

The float switch in your Candy Dishwasher is a critical component designed to prevent your machine from overfilling. 

The switch activates as the water level rises, shutting off the water when it reaches an appropriate level. 

If the float switch is damaged, it may fail to detect the water level correctly, leading to flashing lights on your dishwasher panel.

A common sign of a faulty float switch is the dishwasher failing to fill or drain properly. 

Over time, the float switch can wear out or become stuck due to debris build-up, therefore regular cleaning and maintenance are essential.

Solution

If you suspect your float switch is damaged, the first step is to inspect it for any visible signs of wear or damage. 

Ensure the dishwasher is disconnected from the power source before inspection. If the switch is visibly damaged, it will need to be replaced. 

This is typically a job for an appliance repair professional, but if you’re comfortable with DIY, replacement switches can be purchased from most appliance parts stores.

Remember, regular maintenance of your dishwasher can prevent damage to the float switch and other critical components. It’s always a good idea to consult your user manual for maintenance recommendations specific to your model.

9. Faulty Control Panel

Cause

The control panel is the brain of your dishwasher, directing signals to the various working parts. A faulty control panel could cause the dishwasher to malfunction or stop working entirely. 

The most common symptom is the dishwasher’s lights flashing erratically or not lighting up at all. 

It could be due to wear and tear with time, a power surge, or some form of physical damage to the control board.

Solution

The solution to a faulty control panel is typically to replace it. You can start by unplugging the dishwasher, removing the inner door panel, and examining the control panel. 

Look for any obvious signs of damage such as burnt components or a blown fuse. If there’s no visible damage, or replacing the damaged components doesn’t solve the issue, you may need to replace the entire control panel. 

It’s recommended to consult a professional to avoid any risks or further damage.

10. Incorrect Detergent Use

Cause

The use of incorrect detergent in your Candy Dishwasher can lead to flashing lights, signifying a problem with the wash cycle. 

Most dishwashers are designed for specific types of detergent, and using the wrong one can disrupt the cleaning process and potentially harm the appliance. 

The impact of wrong detergent may manifest in the form of excessive foam, poor cleaning results, and even damage to the dishwasher’s internal parts.

Solution

To solve this problem, first ensure that the detergent you are using is suitable for your Candy dishwasher. 

Check the manual for the recommended types of detergent and avoid using hand dishwashing soap, as it produces too much foam. 

Using the correct type of detergent not only ensures optimal cleaning results but also prolongs the life of your dishwasher. 

If the lights continue to flash after switching to the correct detergent, it may indicate a more serious issue, and you should consider contacting a professional.

Conclusion

Identifying the cause of flashing lights on your Candy dishwasher is crucial in ensuring its efficient operation. 

Missteps such as using the incorrect type of detergent can lead to this issue. However, with the right approach, this issue can be effectively resolved. 

Regularly reviewing and adhering to the guidance provided in the user manual is essential in preventing potential issues and maximizing the performance and lifespan of your dishwasher. 

If problems persist despite following the recommended practices, you should not hesitate to seek professional help. Remember, routine maintenance and timely repairs are key to keeping your dishwasher in optimal condition.

FAQs

Why is my Candy dishwasher flashing?

Your Candy dishwasher may flash due to reasons like incorrect detergent use or internal faults. It’s a signal indicating a problem.

What do flashing lights on the dishwasher mean?

Flashing lights on your dishwasher are a warning that something is wrong, such as a problem with the wash cycle or an internal component.

How do I reset my Candy dishwasher?

You can usually reset your Candy dishwasher by unplugging it, waiting a few minutes, and then plugging it back in. Check your user manual for specific instructions.

Ge Dishwasher No Power No Lights

Neff dishwasher not starting cycle

Whirlpool Dishwasher Fills With Water Then Stops

Whirlpool Dishwasher Fills but Does not Spray

Bosch Dishwasher Flashing Red Light

Siemens Dishwasher Stuck on Eco

Frigidaire Dishwasher Running but No Water

Neff Dishwasher Pump Keeps Running

Bosch Dishwasher Keeps Asking For Salt

Neff Dishwasher Not Filling With Water