Bosch Washing Machine Tap Symbol Flashing (10 Fixes Added!)

We understand how bewildering it can be when your reliable Bosch washing machine starts flashing the tap symbol.

But don’t worry! This article is here to shed some light on this issue and provide you with effective solutions.

We’ve compiled a list of 10 fixes to help you get your Bosch washing machine back to its optimum functioning in no time.

Bosch Washing Machine Tap Symbol Flashing

1. Blocked Inlet Hose

Cause

The tap symbol flashing on your Bosch washing machine could be indicative of a blocked inlet hose.

This occurs when the hose that carries water into your machine becomes obstructed.

This could be due to a buildup of limescale or other debris, which can restrict the flow of water and prevent your machine from operating as it should.

Solution

Addressing a blocked inlet hose involves a few essential steps. First, disconnect the hose from both the machine and the water supply and inspect it for visible blockages.

If none are visible, try running water through the hose to dislodge any internal buildup.

If this doesn’t resolve the issue, it may be necessary to replace the hose entirely.

Please remember, it’s crucial to disconnect the washing machine from the electrical outlet before performing any maintenance tasks.

2. Faulty Water Supply

Cause

The flashing tap symbol on your Bosch washing machine may indicate a faulty water supply.

This could be due to several reasons, such as a clogged filter, obstructed hoses, or even a closed water tap.

A restricted or interrupted water supply prevents the machine from filling up correctly, leading the control system to display the flashing tap symbol as a warning signal.

Solution

To resolve this issue, first, ensure that the water tap connected to the washing machine is fully open and that the water pressure in your area is adequate.

Next, inspect the inlet hoses for kinks or damage and check the filters at the hose connections for any blockages.

Cleaning or replacing the clogged filters and straightening or replacing the obstructed hoses should typically rectify the problem. If the issue persists, it is recommended to seek professional help.

3. Clogged Filter

Cause

The “Tap Symbol Flashing” on your Bosch washing machine is an indication that there might be a clog in the filter.

Over time, debris such as lint, coins, or hair can build up in the filter, impeding the flow of water in and out of the machine.

Solution

To resolve this issue, you need to clean the filter. First, ensure that your machine is off and disconnected from the power source.

Locate the filter (typically at the bottom front of the machine), remove it, and give it a thorough clean under running water.

Use a soft brush to remove stubborn lint or debris. Once cleaned, simply reinsert the filter, ensuring it is secure.

Restart your washing machine to check if the tap symbol has stopped flashing.

4. Faulty Water Pressure Sensor

Cause

The Bosch washing machine’s water pressure sensor can become faulty, leading to the tap symbol flashing.

This usually occurs due to a buildup of debris or sediment in the sensor, disrupting its ability to correctly measure water pressure.

The sensor can also wear out over time due to regular use, leading to inconsistent readings.

Solution

To resolve a faulty water pressure sensor, start by cleaning the sensor to remove any accumulated debris. If the problem persists, it may be necessary to replace the sensor.

This task requires some technical knowledge, and it’s often recommended to have it completed by a qualified appliance repair technician to ensure the proper function of your Bosch washing machine.

5. Defective Inlet Valve

Cause

The inlet valve of your Bosch washing machine is responsible for controlling the water flow into your machine. If the tap symbol is flashing, it could indicate a defect in this valve.

The valve might be failing to open properly, or it might be stuck closed, preventing water from entering the machine.

This could be due to wear and tear, build-up of mineral deposits, or a fault in the electrical controls.

Solution

The solution to a defective inlet valve is typically to replace it.

You can try cleaning the valve first to remove any blockages or mineral deposits, but if this doesn’t work, then a replacement is necessary.

It’s beneficial to hire a qualified appliance technician to handle this task as it involves dealing with electrical components and water connections, ensuring the job is done accurately and safely.

6. Excessive Detergent Usage

Cause

Excessive detergent usage in Bosch washing machines can trigger an array of issues.

Overusing detergent leads to excessive suds, which can hinder the appliance’s ability to effectively rinse clothes.

Moreover, it might confuse the appliance’s sensors, causing the tap symbol to flash as a warning sign.

Solution

To resolve this issue, it’s recommended to use the detergent in the quantity specified by both, the detergent manufacturer and the appliance manual.

An emergency rinse cycle can be run to clear any residual detergent. Regular maintenance and cleaning of the machine can also help in preventing the buildup of excess detergent.

7. Faulty Drain Pump

Cause

The flashing tap symbol on your Bosch washing machine could be indicating a faulty drain pump.

This usually occurs when the pump is unable to effectively remove water from the drum.

The cause could be anything from a blockage due to accumulated lint or small clothing items to a mechanical malfunction in the pump’s motor.

Solution

The solution to a faulty drain pump involves first checking for any visible obstructions in the pump or filter.

If there are no blockages, it may be necessary to replace the pump entirely.

This task should be performed by a qualified technician to ensure the safety and longevity of your Bosch washing machine.

8. Broken Tap Sensor

Cause

The flashing tap symbol on your Bosch washing machine can indicate a problem with the tap sensor.

This is often caused by a faulty water inlet or a blocked filter, preventing the sensor from getting the correct reading of water flow.

Solution

To rectify this issue, first, ensure that the water flow from the tap to the machine is not obstructed and that the tap is fully open.

If the problem persists, check the filter for any blockages and clean it thoroughly. If all else fails, consider hiring a professional to inspect and replace the faulty sensor if necessary.

9. Incorrect Load Size

Cause

The ‘Incorrect Load Size’ signal in your Bosch washing machine typically flashes when the machine is overloaded.

This can occur when too much laundry is added into the drum, exceeding the machine’s capacity.

Overloading puts undue stress on the machine’s motor and might prevent the drum from spinning correctly, which in turn leads to inefficient washing.

Solution

To resolve this issue, it’s recommended to remove some of the laundry from the machine to lighten the load.

Always adhere to the maximum load capacity specified by Bosch for your specific model to prevent future issues.

You can typically find this information in your machine’s user manual. Ensuring the correct load size will not only resolve this issue but also prolong the lifespan of your machine.

10. Faulty Program Selector

Cause

A flashing tap symbol on your Bosch washing machine could indicate a faulty program selector.

This electronic component is responsible for choosing and initiating the appropriate wash cycle.

If it malfunctions, the machine may be unable to select the correct program, leading to the tap symbol flashing as a warning sign.

Solution

To fix this issue, you will likely need professional assistance.

A certified technician can assess the problem and determine whether the program selector can be repaired or must be replaced.

In the meantime, avoid using the machine to prevent further damage. It’s important to address this problem promptly to ensure the longevity of your Bosch washing machine.

Conclusion

A flashing tap symbol on your Bosch washing machine is often an indicator of a water supply issue.

This could be due to a variety of factors, such as a blocked or kinked supply hose, a closed water tap, or even low water pressure in your home.

It’s essential to address these issues promptly to ensure the smooth operation of your appliance.

Always refer to your user manual or get in touch with Bosch’s customer support for the most accurate and helpful advice specific to your model.

FAQs

What does a flashing tap mean on a Bosch washing machine?

A flashing tap symbol on a Bosch washing machine indicates a problem with the water supply. This may be caused by issues like a blocked supply hose, a closed water tap, or low water pressure.

Why is the tap symbol flashing on my washing machine?

The tap symbol flashing on your washing machine signifies a possible water supply problem, such as a blocked supply hose, a closed water tap, or inadequate water pressure.

Why is my washing machine saying the water tap is closed?

Your washing machine may display the message “water tap closed” if it’s unable to draw water. This could be due to the actual water tap being accidentally left closed, a kinked supply hose, or a blockage limiting the water flow.

Why is the water supply blinking on my Bosch dishwasher?

The water supply blinking on your Bosch dishwasher could indicate a water intake issue, possibly due to a closed water tap, a kinked inlet hose, or a clogged filter.

GE vs Maytag Washer

Whirlpool Washing Machine Making Loud Banging Noise on Spin Cycle

Kenmore Washer Lid Lock Flashing

Why Is My New Whirlpool Washer So Loud

washer won’t agitate makes noise

Washing Machine High-Pitched Noise

Dryer Taking Multiple Cycles to Dry

How to Get Rid of Dirty Water in Washing Machine

Dryer Takes 3 Hours to Dry

Whirlpool Washer Not Agitating Properly

GE Washer Water Level Too Low

Bosch Washing Machine Won T Start Beeps Twice