Whirlpool Washer Blinking Green Light ( 10 Fixes Added!)

A blinking green light on your Whirlpool Washer can be a cause for concern, but it doesn’t necessarily indicate a major problem.

This often misunderstood signal is a way for your washer to communicate specific issues or the need for maintenance.

Understanding what this blinking green light means and knowing how to troubleshoot can save you time, frustration, and even some money on unnecessary repairs.

In this guide, we’ll provide 10 fixes to commonly encountered problems associated with the blinking green light on your Whirlpool Washer. Stay tuned!

Whirlpool Washer Blinking Green Light

1. Sensor Malfunction

Cause

The blinking green light on a Whirlpool washer typically indicates a sensor malfunction.

This could be due to a number of reasons such as a faulty lid switch, a damaged motor sensor, or even a misaligned load sensor.

Over time, these sensors can fail or get damaged, resulting in the blinking green light.

Solution

To resolve a sensor malfunction, it is first necessary to identify the specific sensor causing the issue.

Once identified, if the problem lies with a faulty lid switch or misaligned load sensor, they can often be readjusted or replaced easily by following the washer’s manual.

In the case of a damaged motor sensor, however, professional assistance is usually required.

Remember, it is always recommended to seek help from a certified appliance repair technician for any serious washer malfunctions.

2. Door Lock Issues

Cause

The blinking green light on your Whirlpool washer could be indicative of an issue with the door lock.

The washer has a built-in mechanism to ensure the door is locked during the washing cycle for safety reasons.

If the door lock fails to engage properly, it may cause the washer to malfunction, leading to the blinking green light.

Solution

If the problem involves the door lock, a few simple steps can be taken.

Firstly, ensure the door is properly closed. If the light continues to blink, turn off the washer, unplug, and leave it for a few minutes before restarting.

This can reset the system. If the problem persists, the door lock mechanism may be broken and require professional repair or replacement.

It is important to contact a certified appliance repair professional to diagnose and resolve the issue.

3. Unbalanced Load

Cause

An unbalanced load in your Whirlpool washing machine can be caused by various factors.

These usually involve the uneven distribution of clothes inside the drum, causing the machine to move or shake excessively during the spin cycle, indicated by the blinking green light.

Overloading the machine or washing a single heavy item, like a comforter or a heavy towel, can also lead to load imbalance.

Solution

To rectify the issue of an unbalanced load, first, pause the machine and attempt to redistribute your clothes evenly within the drum.

Try to mix large and small items together for a better load balance. Avoid overloading the washer and remember to follow the manufacturer’s guidelines about load size.

For washing a single heavy item, it’s advisable to include a few additional items to help maintain balance during the spin cycle.

4. Overload of Detergent

Cause

The blinking green light on your Whirlpool washer can be indicative of an overload of detergent.

This happens when there’s excessive detergent usage in relation to the load size or water level, causing the machine to work harder than necessary to rinse out all the soap.

This not only can cause the washer to malfunction but also result in poorly washed clothes.

Solution

To resolve this issue, it is vital to use the appropriate amount of detergent for your load size and water level.

Refer to your detergent’s packaging for guidance, and remember that less is often more.

If the green light continues to blink, you may need to run an extra rinse cycle or clean your washer with a washer cleaner to remove any residual detergent build-up.

5. Faulty Control Board

Cause

A faulty control board in your Whirlpool washing machine could be the reason behind the blinking green light.

This integral component is responsible for managing the various functions of your washer.

If it malfunctions, it may not be able to effectively communicate with the other parts of the machine, thus causing the light to blink.

Solution

The solution to a faulty control board is replacing it, as repairs can often be more complex and not cost-effective.

It is advisable to hire a professional technician for this task.

They will unplug the machine, dismantle the back panel, remove the defective control board, and replace it with a new one.

After these steps are completed, the machine should function normally, and the blinking green light issue should be resolved.

6. Motor Overheating

Cause

Motor overheating in a Whirlpool washer can be triggered by several factors, most commonly due to overuse or a blockage in the system.

Continuously running the washer with heavy loads or for extended periods may exert excessive strain on the motor, causing it to overheat.

Additionally, blockages such as lint or small objects stuck in the system can create resistance, leading to elevated motor temperatures.

Solution

To mitigate motor overheating, it is suggested to first check for any blockages and clear them out, ensuring a smooth running of the system.

Next, try to avoid overloading the washer and give the machine sufficient breaks between consecutive cycles.

If these steps don’t resolve the issue, it could be an indicator of a more serious problem with the motor, in which case professional assistance is advised.

7. Inadequate Water Supply

Cause

When your Whirlpool washer flashes a green light, it might be an indication of insufficient water supply.

This can arise due to several reasons including a kinked water hose, blocked filters, or a closed water inlet valve, which prevents the necessary amount of water from reaching the washer.

Solution

The solution to an inadequate water supply is straightforward. Begin by inspecting the water hoses for any kinks or blockages and straightening them if necessary.

Next, check if the filters are clogged with debris and clean them out.

Lastly, verify that the water inlet valve is open. If it’s closed, opening it should restore the water flow to your washer, resolving the issue and stopping the green light from blinking.

8. Faulty Lid Switch

Cause

A common cause of a Whirlpool washer blinking green light is a faulty lid switch.

This switch is designed to prevent the washing machine from operating while the lid is open.

When the switch malfunctions, it may send incorrect signals to the washer, causing the green light to blink continuously.

Solution

The solution is to replace the faulty lid switch. Begin by unplugging the machine, then carefully remove the control panel to access the switch.

Be sure to check your washer’s manual or consult with a professional technician to ensure proper replacement.

Remember, safety should always be your prime concern when dealing with electrical appliances.

9. Blocked Drain Pump

Cause

A blocked drain pump in your Whirlpool washer is often the culprit behind a blinking green light.

The blink is an alarm signal indicating a problem, which can be caused by debris like small clothing items, coins, or lint obstructing the pump.

This blockage hinders the water from draining effectively, affecting the washer’s normal operation.

Solution

To resolve this issue, you’ll need to clean the drain pump. Unplug the washer and locate the pump – it’s usually at the washer’s bottom behind a small door.

Carefully open the drain pump filter by turning it counterclockwise. Remove any visible debris and rinse the filter under running water.

Reinsert the filter, ensure it’s secure, and plug the washer back in. A successful cleaning should stop the green light from flashing and restore your washer’s functionality.

10. Power Surge Issues

Cause

Power surges can occur for a multitude of reasons, including lightning strikes, faulty wiring, or large appliances turning on and off.

These sudden spikes in electrical power can cause your Whirlpool washer to malfunction, often indicated by a blinking green light on the control panel.

Solution

To resolve the issue, try unplugging your washer for about one minute to allow it to reset, which often solves minor electrical glitches.

If the problem persists, it might be necessary to install a surge protector between the appliance and the outlet to shield the washer from future surges or consult a qualified electrician to inspect the home’s wiring.

Conclusion

A blinking green light on your Whirlpool washer’s control panel can indicate an issue caused by power surges.

Surges can originate from various sources such as lightning strikes, faulty home wiring, or the on-and-off cycle of large appliances.

Simple solutions like unplugging the washer for a minute can reset the appliance, often resolving minor electrical issues.

To prevent future occurrences, consider using a surge protector or having your home’s wiring inspected by a professional.

Remember, understanding the root of these issues and acting promptly can increase the longevity of your appliance, ensuring it continues to offer top-notch service.

FAQs

Why is my Whirlpool washer light blinking?

Your Whirlpool washer light might be blinking due to a power surge, which can cause the appliance to malfunction. Unplugging it for a minute or installing a surge protector often resolves this issue.

Why is my Whirlpool dishwasher blinking green?

A blinking green light on your Whirlpool dishwasher could be due to a power interruption or a failure in completing a wash cycle. To rectify this, try resetting your dishwasher by disconnecting it from the power source for a minute.

What does a blinking light mean on a washing machine?

A blinking light on a washing machine typically signals an error or malfunction within the system. The specific issue can often be determined by referencing the appliance’s user manual or consulting with a professional technician.

How do I reset my Whirlpool washer sensor?

To reset your Whirlpool washer sensor, unplug the appliance from the power source for about one minute, then plug it back in. This simple process often helps reset the system and clear any minor sensor issues.

GE vs Maytag Washer

Miele Washing Machine Shaking

Whirlpool Washing Machine Making Loud Banging Noise on Spin Cycle

Kenmore Washer Lid Lock Flashing

Whirlpool Washer Clothes Stuck Under Agitator

Why Is My New Whirlpool Washer So Loud

washer won’t agitate makes noise

Washing Machine High-Pitched Noise

Dryer Taking Multiple Cycles to Dry

Dryer Takes 3 Hours to Dry

Whirlpool Washer Not Agitating Properly

GE Washer Water Level Too Low