10 Common Reasons Whirlpool Washer Sensing Light Flashing

Hello dear visitors welcome to our blog.

If you are facing a problem like a Whirlpool Washer Sensing a Light Flashing. 

So Don worry this is a common issue. In this guide, we explain 10 common reasons for this problem with a unique solution

Whirlpool Washer Sensing Light Flashing

1. Faulty Lid Switch Mechanism

Cause

A common reason behind the Whirlpool washer sensing light flashing is a faulty lid switch mechanism. 

The lid button is a security feature developed to prevent the washer from turning when the lid is open. 

However, if the switch is malfunctioning, it may incorrectly sense that the lid is open even when it’s securely closed, disrupting the wash cycle.

Solution

The most straightforward solution to this issue is to replace the faulty lid switch. You can either call a professional or attempt to do it yourself if you’re comfortable with appliance repair. 

Before starting the repair, ensure to disconnect the power supply to avoid any electrical hazards. 

Remember, it’s essential to use a replacement part that is compatible with your specific Whirlpool washer model to ensure the proper functioning of the machine after the repair.

2. Misaligned Load Balance

Cause

A core cause of the Whirlpool Washer’s sensing light flashing is a misaligned load balance.

Essentially, this means that the clothes inside the washer are not evenly distributed, causing the washer to shake or stop and triggering the sensing light to flash. 

Unevenly spread clothes can disrupt the washer’s balance during the spin cycle, leading to potential damage if not resolved.

Solution

The solution to a misaligned load balance is simple and requires no technical expertise. Begin by pausing the washer and opening the door. 

Next, rearrange the clothes so they are spread evenly in the drum, then close the door and restart the washing cycle. 

Regularly check to make sure your clothes are evenly spread when using the washer. 

This basic preventative measure can help avoid the problem of a misaligned load balance and the subsequent flashing of the sensing light.

3. Inadequate Water Supply

Cause

Inadequate water supply to your Whirlpool washer can be a major contributing factor for the sensing light to flash. 

Possible causes could include a turned-off water supply valve, a kinked hose, or a clogged filter screen. 

Ensure that the water supply valve is turned on and verify that the hose is not kinked or obstructed.

Solution

To resolve this issue, first, check the water supply valve and turn it on if it’s off. Inspect the hoses for any visible deformities and straighten them if they are kinked. 

If the problem persists, the filter screens might be clogged. These are located in the water inlet valve and can be cleaned or replaced as needed. 

Cleaning or replacing a clogged filter screen can often solve the issue of insufficient water supply.

4. Blocked Drain Pipe

Cause

The most common cause for a blocked drain pipe in a Whirlpool washer is the accumulation of lint, small clothing items (like socks or handkerchiefs), or other debris. 

Over time, these items can build up in the drain pipe, causing it to become clogged and preventing water from draining properly. 

This obstruction disrupts the washer’s normal function and results in the sensing light flashing as an alert.

Solution

The solution to a blocked drain pipe is usually straightforward – it involves clearing the blockage. First, unplug the washing machine and locate the drain pipe. 

It should be at the rear of the machine. Detach the pipe carefully and use a long, flexible brush to clear out any debris. 

You may also rinse the pipe with warm water to make sure it is thoroughly clean. After cleaning, reattach the drain pipe securely and ensure it’s properly connected to prevent leaks. 

Remember, if the problem persists, it is best to consult with a professional appliance repair technician.

5. Overloaded Washing Machine

Cause

An overloaded washing machine is often caused when too many clothes are added to the washer, exceeding the machine’s capacity. 

Overstuffing your washer can put excessive stress on the drum and motor, which can lead to performance issues. 

Remember, the washing machine’s performance is contingent on its ability to freely move clothes in the drum during the cycle.

Solution

The solution to an overloaded washing machine is simple: do not exceed the machine’s load capacity. 

Always refer to your machine’s user manual to understand the maximum load it can handle. If the load is too big, split it into smaller loads. 

This approach not only prevents overloading but also ensures that your clothes are cleaned effectively. 

Besides, spreading out laundry throughout the week can prevent the tendency to overload the machine.

6. Defective Water Level Sensor

Cause

The water level sensor, also known as a pressure switch, is crucial in controlling the amount of water that enters your washing machine. 

If the sensing light is flashing, it may indicate a defect in the water level sensor. 

This could be due to a mechanical issue, such as a blockage in the air dome tube, or electrical faults like damaged wiring or a malfunctioning sensor itself.

Solution

To solve this issue, first check the air dome tube for any visible obstructions and remove them. If the problem persists, inspect the wiring for any signs of damage. 

If you’re not comfortable performing these checks, contact a professional technician. They will be able to accurately diagnose the issue and replace the faulty part if necessary. 

Remember, attempting to repair electrical components without sufficient expertise can be dangerous. Always prioritize safety and seek professional help when in doubt.

7. Malfunctioning Control Board

Cause

The control board regulates the majority of the functions in your Whirlpool washer. If the sensing light is flashing, it could indicate that the control board is failing or has already failed. 

Common indications of a malfunctioning control board include erratic behavior, such as random flashing of lights or irregular spin cycles.

Solution

The recommended solution for a malfunctioning control board is to seek professional repair or replacement. 

It’s advisable not to attempt a DIY repair as this could further damage the appliance or pose a safety risk. 

A certified technician will be able to diagnose the exact issue and carry out the necessary repairs or replace the board if needed. 

Always remember to disconnect the washer from the power source before any repair or maintenance is attempted.

8. Worn Out Drive Belt

Cause

The drive belt in a Whirlpool washer is responsible for transferring the motor’s energy to the drum. 

Over time, due to constant use and friction, the belt can wear out or even break. 

This can result in a variety of issues, including the washer’s sensing light flashing as it struggles to spin the drum.

The wear and tear of the drive belt are inevitable. It’s caused by the constant high-speed rotation and weight of the laundry load.

Solution

To resolve this issue, the worn-out drive belt needs to be replaced. 

This task can be performed by a professional technician or, with the right tools and instructions, by the owner. 

However, preventative maintenance, like not overloading the washer, can extend the life of the drive belt. Regular inspections can also help identify and replace a worn-out belt before it breaks completely.

9. Incorrect Washing Machine Settings

Cause

Sometimes, the reason behind the sensing light flashing on your Whirlpool washer may be as simple as incorrect settings. 

Misaligned settings can confuse the machine, causing it to flash the sensing light as an error signal.

The two most common settings issues are wrong cycle selection and incorrect load size. 

If the selected cycle doesn’t align with the type of laundry you’re washing or if the load size is incompatible with the chosen settings, the machine may react by flashing the sensing light.

Solution

Fortunately, incorrect settings are relatively easy to correct. Start by pausing or canceling the current cycle. 

Once stopped, reconfigure your settings to match the type of laundry you’re washing and the size of the load. Make sure to select the appropriate cycle and adjust the load size accordingly.

Finally, restart the machine. If the settings were indeed the issue, the sensing light should stop flashing and your machine should function as expected.

10. Wiring or Power Supply Issues

Cause

Wiring or power supply issues are often the culprit when your Whirlpool Washer’s sensing light is flashing. 

This can occur due to multiple reasons: faulty wiring, unexpected power surges, or a damaged power supply. 

Faulty wiring can prevent power from reaching the washer correctly. Similarly, power surges can cause a temporary malfunction. 

Lastly, a damaged power supply may mean the washer is not receiving sufficient power to operate correctly.

Solution

To address wiring and power supply issues, ensure the washer is properly plugged in and the power outlet is functioning. 

Try using a different power outlet to confirm if the issue lies there. If the problem persists, it may be due to internal wiring issues, which should be addressed by a professional. 

Engage a certified service technician to inspect and repair any internal wiring faults to prevent further damage or safety hazards. 

Regular maintenance checks can help prevent such issues in the future.

Conclusion

A flashing sensing light on your Whirlpool washer should not be a cause for immediate alarm. 

It is primarily an indication that the machine is working as it should, assessing the load before proceeding with the wash cycle. 

However, if the sensing light continues to flash beyond a few moments, it could signal an issue with the washer’s load-sensing feature. 

In such cases, it’s recommended to check for potential problems such as an unbalanced load, a clogged drain pipe, or a malfunctioning sensor. 

If the problem persists, professional assistance may be required. Always remember, that regular maintenance and proper use are key to the longevity and efficiency of your washer.

FAQs

How do I reset my Whirlpool washer sensor?

You can reset your Whirlpool washer sensor by disconnecting the machine from the power source for about a minute and then reconnecting it.

What does a blinking light mean on a washing machine?

A blinking light on a washing machine typically signals an error or a problem that needs to be addressed.

Why is the light flashing on my Whirlpool dryer?

The flashing light on your Whirlpool dryer could indicate a problem with the unit, such as a blockage in the vent or a malfunctioning component.

Lg Washing Machine Fills With Water When Not in Use

Indesit Washing Machine All Lights Flashing

Washer Slowly Fills With Water When Not in Use

Indesit Washing Machine Door Lock Light On

Samsung Washing Machine No Power No Lights

Indesit IWDE126 Door Wont Open

How to Remove Rotten Egg Smell From Washing Machine

Why Is My Washing Machine Pausing

Kenmore Washing Machine Not Draining

Washing Machine Drainage Options

Kenmore Washing Machine Not Agitating

Whirlpool Washer Blinking Green Light

Whirlpool Washer Stuck on Rinse

Whirlpool Washer Stops Mid Cycle

Whirlpool Washer Door Locked Flashing and Pump Running

How to Move Stacked Washer Dryer